LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Audi >> 1987 >> 5000 CS, Standard >> Repair and Diagnosis >> Steering >> Power Steering >> Steering System - Power >> Overhaul >> Steering Gear >> Reassembly
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Steering Gear: Reassembly

  1. To install new oil seal in housing, place oil seal on flat surface and push sleeve (available in Repair Kit 811 498 020 ) into oil seal. Slide rack into housing.
  2. Using Seal Installers (VW 426 and VW 416b ), slide oil seal with sleeve over rack and into housing. Remove sleeve. Install snap ring and retaining ring into housing.
  3. Install end housing with new "O" ring. Install thrust piece, spring, "O" ring, seal retainer, and plate. Install clamp, boot, and retaining ring. Install valve assembly as previously outlined.
scientia non olet · About LEMON Manuals