Shift Position Indicator Inspection
NOTE:
Since there is no direct method to test the component itself, troubleshooting is performed on the related components.
Test Procedure
Transmission range switch signal inspection
- Preparation
-
- -
Shift position indicator connector (12P): disconnected.
- -
- Procedure
-
- Turn the vehicle to the ON mode.
- Compare the transmission range switch signal inputs with the HDS.
- Normal Conditions
-
- -
Shift position/mode and transmission range switch signal match.
- -
Results
- If it is normal, there is a problem with the shift position indicator.
- If it is abnormal, there is a problem with other related components.