SRM_BACK_UP Circuit Inspection

Test Procedure 

• Preparation
• • Body control module connector A (66P): disconnected
  • Relay control module connector C (18P): disconnected
• Procedure
• • Perform the inspection according to the following table.

(Disconnected)Body control module connector A (66P) female terminals

(Disconnected)Relay control module connector C (18P) female terminals

IG Mode

Courtesy of HONDA, U.S.A., INC.

Courtesy of HONDA, U.S.A., INC.

Normal Conditions

SRM_BACK_UP open wire inspection 

OFF

There is less than 1 Ω 

Refer to the Open/Shorted Wire Inspection Description for the method to inspect the shorted circuit below, then start to inspect according to circumstances.

SRM_BACK_UP shorted to ground inspection 

OFF

There is more than 1 MΩ 

Results 

• If abnormal, there is a problem in the circuit.