October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Telematics Control Unit Connector For Inputs And Outputs
NOTE:
The front HFL-ANC/active sound control microphone and the HFL microphone are the same parts.
| Connector Index |
| Telematics Control Unit Connector A (32P) |
| Telematics Control Unit Connector B (5P) |
| Telematics Control Unit Connector C (4P) |
| Telematics Control Unit Connector D (2P) |
Telematics Control Unit Connector A (32P) (female terminals)
 Courtesy of HONDA, U.S.A., INC.
|
| Cavity |
Terminal Name |
Description |
| A1 |
Not used |
--- |
| A2 |
ACC(VST) |
Power source for accessories |
| A3 |
Not used |
--- |
| A4 |
E-CALL_SW+ |
Detects signal from LINK/ASSIST buttons |
| A5 |
E-CALL_SW- |
LINK/ASSIST buttons ground |
| A6 |
GND |
Ground for telematics control unit (G304) |
| A7 |
SH_MIC |
Shield for terminals No. 8 and No. 9 |
| A8 |
MIC- |
Inputs sound signal from HFL microphone |
| A9 |
MIC+ |
Inputs sound signal from HFL microphone |
| A10 |
MIC_PWR |
Power source for front HFL-ANC/active sound control microphone |
| A11 |
HFT_MUTE |
Outputs HFL microphone directivity switching signal |
| A12 |
TELEM_SIG+ |
Outputs sound prompts |
| A13 |
TELEM_SIG- |
Outputs sound prompts |
| A14 |
Not used |
--- |
| A15 |
Not used |
--- |
| A16 |
Not used |
--- |
| A17 |
+B_BACKUP(VST) |
Continuous power source |
| A18 |
IG1_METER(VST) |
IG1 power source |
| A19 |
Not used |
--- |
| A20 |
E-CALL_LED_RED |
Outputs drive signal for AcuraLink system status indicator LED (red) |
| A21 |
E-CALL_LED_GREEN |
Outputs drive signal for AcuraLink system status indicator LED (green) |
| A22 |
YB-CAN A_L |
Communication signal |
| Cavity |
Terminal Name |
Description |
| A23 |
YB-CAN A_H |
Communication signal |
| A24 |
TEL_MUTE |
Outputs audio system mute signal |
| A25 |
HFT_MIC+ |
Outputs Voice Recognition (VR) prompts |
| A26 |
HFT_MIC- |
Outputs Voice Recognition (VR) prompts |
| A27 |
MIC_MUTE |
Inputs HFL microphone directivity switching signal |
| A28 |
SH_TELEM_SIG |
Shield for terminals No. 12 and No. 13 |
| A29 |
CDS |
Inputs collision detection signal |
| A30 |
Not used |
--- |
| A31 |
Not used |
--- |
| A32 |
Not used |
--- |
Telematics Control Unit Connector B (5P) (female terminals)
 Courtesy of HONDA, U.S.A., INC.
|
| Cavity |
Terminal Name |
Description |
| B1 |
USB GND |
Ground for USB |
| B2 |
USB VBUS |
Outputs power source for USB |
| B3 |
USB DATA+ |
Communication signal |
| B4 |
USB DATA- |
Communication signal |
| B5 |
USB SH |
Shield for terminals No. 1, No. 2, No. 3, and No. 4 |
Telematics Control Unit Connector C (4P) (female terminals)
 Courtesy of HONDA, U.S.A., INC.
|
| Cavity |
Terminal Name |
Description |
| C1 |
TEL ANT 1 |
Cellular communication signal (primary) |
| Cavity |
Terminal Name |
Description |
| C2 |
GNSS(TEL) |
Inputs GPS signal |
| C3 |
SH(TEL ANT 1) |
Shield for terminal No. 1 |
| C4 |
SH(GNSS(TEL)) |
Shield for terminal No. 2 |
Telematics Control Unit Connector D (2P) (female terminals)
 Courtesy of HONDA, U.S.A., INC.
|
| Cavity |
Terminal Name |
Description |
| D1 |
TEL ANT 2 |
Cellular communication signal (secondary) |
| D2 |
SH(TEL ANT 2) |
Shield for terminal No. 1 |