LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 2014 >> TL Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> Paddle Shifter Replacement
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Paddle Shifter Replacement

SRS components are located in this area. Review the SRS component locations (see COMPONENT LOCATION INDEX ) and the precautions and procedures (see PRECAUTIONS AND PROCEDURES ) before doing repair or service.

  1. Remove the steering wheel (see STEERING WHEEL REMOVAL ).
  2. Remove the four screws (A) securing the steering wheel rear cover (B).
    Fig 1: Identifying Screws, Steering Wheel Rear Cover And Snap-Fit Portion
    G08066655Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Pull the snap-fit portion (C) up carefully, then remove the steering wheel rear cover.
  4. Disconnect the paddle shifter + (upshift switch) connector or the paddle shifter - (downshift switch) connector. Remove the screws (A) securing the paddle shifter + (upshift switch) (B) or the paddle shifter - (downshift switch) (C), then remove the paddle shifter + or the paddle shifter -.
    Fig 2: Identifying Screws, Paddle Shifter + (Upshift Switch) And Paddle Shifter - (Downshift Switch)
    G08066656Courtesy of AMERICAN HONDA MOTOR CO., INC.
  5. Install a new paddle shifter + or a new paddle shifter - on the steering wheel.
  6. Connect the paddle shifter + connector or the paddle shifter - connector securely, and install the connector in the connector holder.
  7. Install the steering wheel rear cover with the screws.
  8. Install the steering wheel (see STEERING WHEEL INSTALLATION ).
scientia non olet · About LEMON Manuals