LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 2012 >> ZDX >> Repair and Diagnosis >> Engine Performance >> Testing & Diagnosis >> VTEC >> Rocker Arm Oil Pressure Switch Removal/Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Rocker Arm Oil Pressure Switch Removal/Installation

  1. Disconnect the rocker arm oil pressure switch connector (A), then remove the rocker arm oil pressure switch (B).
    Fig 1: Rocker Arm Oil Pressure Switch, O-Ring And Connector With Torque Specifications
    G08072888Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Install the parts in the reverse order of removal with a new O-ring (C).
scientia non olet · About LEMON Manuals