LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 2012 >> RL >> Repair and Diagnosis >> Electrical >> Charging Systems >> Charging System >> Drive Belt Replacement
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Drive Belt Replacement

Special Tools Required 

Belt Tension Release Tool Snap-on YA9317* or equivalent

*Available through the Acura Tool and Equipment Program, 888-424-6857.

  1. Remove the right upper fender trim (see UPPER FENDER TRIM REPLACEMENT ).
  2. Remove the engine cover (see IGNITION COIL AND SPARK PLUG REMOVAL/INSTALLATION ).
  3. Move the auto-tensioner (A) using the belt tension release tool (YA9317) in the direction shown to relieve tension from the drive belt, then remove the drive belt.
    Fig 1: Identifying Belt Tension Release Tool
    G07353489Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Install the new drive belt in the reverse order of removal.
scientia non olet · About LEMON Manuals