LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 2012 >> RL >> Repair and Diagnosis >> Brakes >> Traction Control >> Vehicle Stability Assist System >> General Troubleshooting Information >> How to Clear DTCs
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

How to Clear DTCs

  1. With the ignition switch in LOCK (0), connect the HDS to the data link connector (DLC) under the driver's side of the dashboard.
  2. Turn the ignition switch to ON (II).
  3. Make sure the HDS communicates with the vehicle and the VSA modulator-control unit. If it does not, troubleshoot the DLC circuit (see DLC CIRCUIT TROUBLESHOOTING ).
  4. Clear the DTC(s) by following the screen prompts on the HDS.
  5. Turn the ignition switch to LOCK (0).
scientia non olet · About LEMON Manuals