LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 2011 >> MDX >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> PGM-FI System >> MAP Sensor Replacement
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

MAP Sensor Replacement

  1. Remove the engine cover (see step 6 under ENGINE REMOVAL ).
  2. Disconnect the MAP sensor 3P connector (A).
    Fig 1: Identifying MAP Sensor 3P Connector And Screw
    G08057169Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Remove the screw (B).
  4. Remove the MAP sensor (C).
  5. Install the parts in the reverse order of removal with a new O-ring (D).
scientia non olet · About LEMON Manuals