LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 2011 >> MDX >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Intake Air System >> Air Cleaner Removal/Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Air Cleaner Removal/Installation

  1. Disconnect the MAF sensor/IAT sensor 5P connector (A).
    Fig 1: MAF Sensor/IAT Sensor 5P Connector And Bolts With Torque Specifications
    G08052610Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Remove the bolts (B) and (C), then remove harness clamps (D).
  3. Remove the air cleaner (E).
  4. Install the parts in the reverse order of removal.
scientia non olet · About LEMON Manuals