September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Fuel Pulsation Damper Replacement
- Relieve the fuel pressure (see
FUEL PRESSURE RELIEVING ).
- Remove the charge air cooler (see
CHARGE AIR COOLER REMOVAL AND INSTALLATION
).
- Remove the injector cover (see step 3
).
- Disconnect the connectors from the injectors, then. Remove the harness holder (see step 4
).
- Remove the fuel pulsation damper (A) from the fuel rail (B).
Courtesy of AMERICAN HONDA MOTOR CO., INC.
- Install the parts in the reverse order of removal with a new sealing washer (C).