LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 2009 >> CSX Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 64 (Wiper System & Washer System) >> Wiper Blade Replacement
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Wiper Blade Replacement

WARNING: This page is about a different car, the 2011 Acura TL, 2010 Acura TL, and 2009 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.
  1. Lift the wiper arms from the windshield
    NOTE: Lift the driver's side first
  2. Press and hold the tab (A) and slide the wiper blade (B) toward the tab to release it from the wiper arm (C)
    Fig 1: Sliding Wiper Blade
    G05989056Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Slide the rubber (A) out from the wiper blade (B)
    Fig 2: Sliding Rubber Out From Wiper Blade
    G05989057Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Install a new rubber to the wiper blade in the reverse order of removal
  5. Install the wiper blades onto the wiper arms in the reverse order of removal
  6. Check the wiper operation, if the blades slip, turn the wiper switch OFF, and reinstall the wiper blades securely
scientia non olet · About LEMON Manuals