Washer Motor Test: Windshield

WARNING: This page is about a different car, the 2011 Acura TL, 2010 Acura TL, and 2009 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.

Remove the right inner fender (see FRONT INNER FENDER REPLACEMENT )
Disconnect the 2P connector (A) from the windshield washer motor (B)

Fig 1: Identifying Windshield Washer Motor And 2P Connector
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Test the motor by connecting battery power to terminal No 2 and ground to terminal No 1 of the washer motor The motor should run
- If the motor does not run or fails to run smoothly, replace it
- If the motor runs smoothly, but little or no washer fluid is pumped, check for a disconnected or blocked washer hose, or a clogged washer motor outlet