Trunk Lid Latch Switch Test
WARNING: This page is about a different car, the 2011 Acura TL, 2010 Acura TL, and 2009 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.
- Open the trunk lid, and remove the trunk lid trim (see TRIM REMOVAL/INSTALLATION - TRUNK LID )
- Disconnect the 3P connector (A) from the trunk lid latch assembly (B)
- Check for continuity between terminals No land No 2
- There should be continuity with the trunk lid open
- There should be no continuity with the trunk lid closed
- If the continuity is not as specified, replace the trunk lid latch assembly