Rocker Arm Oil Pressure Switch Removal/Installation

WARNING: This page is about a different car, the 2011 Acura TL, 2010 Acura TL, and 2009 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the rocker arm oil pressure switch connector (A), then remove the rocker arm oil pressure switch (B)

Fig 1: Rocker Arm Oil Pressure Switch Connector And O-Ring With Torque Specification
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the parts in the reverse order of removal with a new O-ring (C)