LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 2009 >> CSX Base, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Wipers/Washers >> Wiper Blade Replacement
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Wiper Blade Replacement

  1. Lift the wiper arm off the windshield, raising the driver's side first, then the passenger's side.
  2. Remove the cover (A), by squeezing the two tabs and pulling it straight out.
    Fig 1: Squeezing Tabs
    G06268822Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Press and hold the tab (B), and slide the wiper blade (C) toward the tab until it releases from the wiper arm (D).
  4. Find the side of the blade labeled "LOCK" (A), then pull back the end of the blade and slide out the old rubber (B).
    Fig 2: Pulling Back End Of Blade And Slide Out Old Rubber
    G06268823Courtesy of AMERICAN HONDA MOTOR CO., INC.
  5. Install a new rubber in the reverse order of removal.
  6. Install the wiper blades onto the windshield wiper arms in the reverse order of removal.
  7. Test by turning on the wipers. If the blades slip, turn off the wipers and seat the attachments more firmly.
scientia non olet · About LEMON Manuals