LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 2008 >> MDX >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> A/T Interlock System >> Shift Lock Solenoid Test
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Shift Lock Solenoid Test

  1. Connect the HDS to the DLC (A).
    Fig 1: Identifying Data Link Connector
    G05485819Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Select the Shift Lock Solenoid Test in the Miscellaneous Test Menu, and check that the shift lock solenoid operates with the HDS.
    NOTE: If the HDS does not communicate with the PCM, troubleshoot the DLC circuit (see DLC CIRCUIT TROUBLESHOOTING ).
  3. Check that the shift lever can be moved out of P when the Shift Lock Solenoid is: ON. Move the shift lever back in P, and make sure it locks with the Shift Lock Solenoid is: OFF.
  4. Check that the shift lock releases when the shift lock release is pushed, and check that it locks when the shift lock release is released.
  5. If the shift lock solenoid does not work properly, perform shift lock system troubleshooting (see SHIFT LOCK SYSTEM CIRCUIT TROUBLESHOOTING  ).
scientia non olet · About LEMON Manuals