Removal and Replacement

Alternator Removal and Installation

Removal
1. Make sure you have the anti-theft codes for the audio system and navigation system (if equipped).
2. Disconnect the negative cable from the battery first, then disconnect the positive cable.
3. Remove the drive belt.
4. Remove the auto-tensioner.




5. Disconnect the alternator connector (A) and BLK wire (B) from the alternator.




6. Remove the three bolts securing the alternator, then remove the alternator.

Installation




1. Install the three bolts securing the alternator.




2. Connect the alternator connector (A) and BLK wire (B) to the alternator.
3. Install the auto-tensioner.
4. Install the drive belt.
5. Connect the positive cable to the battery first, then the connect negative cable.
6. Enter the anti-theft codes for the audio system and navigation system (if equipped).
7. Set the clock.