LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 2007 >> TSX Automatic >> Repair and Diagnosis >> Body & Frame >> Windows >> Power Windows >> DTC Troubleshooting >> DTC B1140: Driver's Power Window Position Detect Circuit Error
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

DTC B1140: Driver's Power Window Position Detect Circuit Error

  1. Clear the DTCs using the HDS.
  2. Cycle the ignition switch to OFF and then back ON (II).
  3. Open and close the driver's power window by using the driver's switch manually.
  4. Check for DTCs using the HDS.

    Is DTC B1125 or B1126 indicated? 

    YES  -Troubleshoot the DTC B1125 or B1126 (see DTC B1125: DRIVER'S POWER WINDOW MOTOR A PULSE ERROR; DTC B1126: DRIVER'S POWER WINDOW MOTOR B PULSE ERROR  ).

    NO  -Go to step 5.

  5. Do the power window control unit reset procedure (see RESETTING THE POWER WINDOW  ).
  6. Check for DTCs again using the HDS.

    Is DTC B1140 indicated? 

    YES  -Faulty door multiplex control unit; replace the power window master switch.

    NO  -The system is recovered at this time.

scientia non olet · About LEMON Manuals