October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Torque Specifications

Main Bearing Cap

Tighten the bearing cap bolts, and then the bearing cap side bolts to the specified torque in the sequence as shown. Repeat the torque sequence again to make sure the bolts are properly torqued.

Main Bearing Size Codes

Crankshaft Pulley
Tightening Torque 65 Nm (6.5 kgf-m, 47 lbf-ft) + 60°