LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 2007 >> TL Base >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> PGM-FI System >> Knock Sensor Replacement
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Knock Sensor Replacement

  1. Remove the engine cover (see step 1 on REMOVAL ).
  2. Remove the fuel rails and the injector base (see INJECTOR BASE REMOVAL AND INSTALLATION ).
  3. Disconnect the knock sensor IP connector (A), then remove the knock sensor (B).
    Fig 1: Knock Sensor With Torque Specifications
    G05458143Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Install the parts in the reverse order of removal.
scientia non olet · About LEMON Manuals