LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 2007 >> TL Base >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> PGM-FI System >> IAT Sensor Replacement
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

IAT Sensor Replacement

  1. Remove the engine cover (see step 1 on REMOVAL ).
  2. Disconnect the IAT sensor 2P connector (A).
    Fig 1: IAT Sensor 2P Connector With Torque Specifications
    G05458131Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Remove the IAT sensor (B).
  4. Install the parts in the reverse order of removal with a new O-ring (C).
scientia non olet · About LEMON Manuals