DTC B1702: Display Panel Control Unit EEPROM Error
NOTE:
- Display panel control unit DTCs may not clear using the HDS. If the DTCs will not clear, manually reset the display panel control unit (see RESETTING THE DISPLAY PANEL ).
- If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-CAN system diagnosis test mode A (see TROUBLESHOOTING - B-CAN SYSTEM DIAGNOSIS TEST MODE A ).
- Turn the ignition switch to ON (II).
- Clear for DTCs with the HDS.
- Turn the ignition switch to LOCK (0), and then back ON (II).
- Check for DTCs with the HDS.
Is DTC B1702 indicated?
YES -Replace the display panel control unit.
NO -Intermittent failure, the system is OK at this time.