LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 2007 >> RL >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (PGM-FI System) >> MAP Sensor Replacement
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

MAP Sensor Replacement

WARNING: This page is about a different car, the 2008 Acura TL and 2007 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the engine cover (see step 1 on REMOVAL ).
  2. Disconnect the MAP sensor 3P connector (A).
    Fig 1: MAP Sensor 3P Connector With Torque Specifications
    G05458130Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Remove the screw (B).
  4. Remove the MAP sensor (C).
  5. Install the parts in the reverse order of removal with a new O-ring (D).
scientia non olet · About LEMON Manuals