LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 2007 >> RL >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> Navigation System >> Voice Control Switch Test
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Voice Control Switch Test

  1. Remove the driver's airbag assembly (see DRIVER'S AIRBAG REPLACEMENT ).
  2. Remove the 20P connector from the cable reel.
    Fig 1: Identifying 20P Connector At Cable Reel
    G05497665Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Measure the resistance between the No. 10 and No. 18 terminals in each switch position according to the table.
    RESISTANCE CHART

    Position Resistance
    OFF About 1 kΩ
    Talk button pressed About 697 Ω
    Back button pressed About 529 Ω
  4. If the resistance is not as specified, replace the remote switch (see STEERING WHEEL DISASSEMBLY/REASSEMBLY ), and replace the voice control switch (see STEERING WHEEL DISASSEMBLY/REASSEMBLY ).
  5. Use a diode tester between the terminals in each switch position as shown.
    Fig 2: Testing Remote Switch Using Diode Tester Between Terminals As Shown
    G05497666Courtesy of AMERICAN HONDA MOTOR CO., INC.
  6. If the diode test is not as specified, replace the remote switch (see STEERING WHEEL DISASSEMBLY/REASSEMBLY ), and replace the voice control switch (see STEERING WHEEL DISASSEMBLY/REASSEMBLY ).
scientia non olet · About LEMON Manuals