LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 2006 >> RSX L4-2.0L >> Repair and Diagnosis >> Specifications >> Mechanical Specifications >> Engine >> System Specifications >> Tightening Torques and Sequences >> Rod Bearing Cap
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Rod Bearing Cap

Rod Bearing Cap
Apply engine oil to the bolt threads, then install the rod caps with bearings. Tighten the connecting rod bolts.
Tightening Torque
K20A3 Engine 20 Nm (2.0 kgf-m, 14 ft. lbs.)
K20A2, K20Z1 Engines 29 Nm (3.0 kgf-m, 22 ft. lbs.)





Tighten the connecting rod bolts an additional 90°.

NOTE: Remove the connecting rod bolt if you tightened it beyond the specified angle, and go back to step 8 of the procedure. Do not loosen it back to the specified angle.

scientia non olet · About LEMON Manuals