LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 2006 >> RSX Base, Standard >> Repair and Diagnosis (Single Page) >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Climate Control System >> A/C Compressor Thermal Protector Replacement
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

A/C Compressor Thermal Protector Replacement

  1. Remove the bolt, the ground terminal (A), and the holder (B). Disconnect the field coil connector (C), then remove the thermal protector (D).
    Fig 1: Removing Bolt, Ground Terminal And Holder
    G03652970Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Replace the thermal protector (A) with a new one, and apply silicone sealant (B) to the bottom of the thermal protector.
    Fig 2: Applying Silicone Sealant To Bottom Of Thermal Protector
    G03652971Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Install the thermal protector in the reverse order of removal.
scientia non olet · About LEMON Manuals