LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 2006 >> RSX Base, Standard >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> PGM-FI System >> Knock Sensor Replacement >> K20A3 engine
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

K20A3 engine

  1. Remove the intake manifold (see INTAKE MANIFOLD REMOVAL AND INSTALLATION ).
  2. Disconnect the knock sensor 1P connector.
  3. Remove the knock sensor (A).
    Fig 1: Removing Knock Sensor And Torque Specifications
    G03650905Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Install the sensor in the reverse order of removal.
scientia non olet · About LEMON Manuals