LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 2005 >> TSX Standard >> Repair and Diagnosis (Single Page) >> Heating, Ventilation & A/C (HVAC) >> A/C Compressor >> Automatic HVAC System >> Climate Control >> Mode Control Motor Replacement
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Mode Control Motor Replacement

  1. Open the glove box. Remove the damper from the glove box, then let the glove box hang down (see GLOVE BOX REMOVAL/INSTALLATION ).
  2. Remove the relays from the bracket.
    Fig 1: Identifying Relays Of Bracket
    G05492679Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Disconnect the 7P connector (A) from the mode control motor (B). Remove the self-tapping screws and the mode control motor from the heater unit.
    Fig 2: Identifying 7P Connector And Mode Control Motor
    G05492680Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Install the motor in the reverse order of removal. After installation, make sure the motor runs smoothly.
scientia non olet · About LEMON Manuals