LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 2005 >> TL V6-3.2L >> Repair and Diagnosis >> Body and Frame >> Relays and Modules - Body and Frame >> Memory Positioning Module >> Testing and Inspection >> Power Seat Control Unit Input Test
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Power Seat Control Unit Input Test

Power Seat Control Unit Input Test

NOTE: Before troubleshooting the DPMS, troubleshoot the multiplex integrated control system first using B-CAN System Diagnosis Test Mode A.

1. Turn the ignition switch OFF.
2. Remove the driver's power seat.

NOTE: Be careful not to scratch the interior trim.




3. Disconnect the connectors from the power seat control unit (A).

NOTE: All connectors view are from wire side of female terminals.

4. Inspect the connector and socket terminals to be sure they are all making good contact.
- If the terminals are bent, loose or corroded, repair them as necessary and recheck the system.
- If the terminals look OK, go to step 5.




5. With the power seat control unit still disconnected, make these input tests at the connectors.
- If any test indicates a problem, find and correct the cause, then recheck the system.
- If all the input tests prove OK, the control unit must be faulty; replace it.
scientia non olet · About LEMON Manuals