LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 2005 >> RL >> Repair and Diagnosis >> Engine Performance >> System >> PGM-FI System >> IAT Sensor Replacement
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

IAT Sensor Replacement

  1. Remove the engine cover (see step 1 under INTAKE MANIFOLD REMOVAL AND INSTALLATION ).
  2. Disconnect the IAT sensor connector (A).
    Fig 1: IAT Sensor Connector And IAT Sensor With Torque Specifications
    G05494510Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Remove the IAT sensor (B).
  4. Install the parts in the reverse order of removal with a new O-ring (C).
scientia non olet · About LEMON Manuals