LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 2005 >> RL V6-3.5L >> Repair and Diagnosis >> Powertrain Management >> Transmission Control Systems >> Testing and Inspection >> Component Tests and General Diagnostics >> ATF Temperature Sensor Replacement
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

ATF Temperature Sensor Replacement

ATF Temperature Sensor Replacement
1. Remove the splash shield.
2. Disconnect the ATF temperature sensor connector (A), then remove the connector from the connector bracket (B).





3. Remove the harness clamp (C) from its bracket (D).
4. Remove the ATF temperature sensor, and replace the sensor.
5. Install a new O-ring (E) on the new ATF temperature sensor (F).
6. Install the ATF temperature sensor connector to the connector bracket, then connect the connector securely.
7. Install the harness clamp on its bracket.
8. Install the splash shield.
scientia non olet · About LEMON Manuals