Ignition Timing
WARNING: This page is about a different car, the 2003 Acura 3.2CL, 2002 Acura 3.2CL, and 2001 Acura 3.2CL. However, it is still accessible from the selected car via links, so may be relevant.
Check ignition timing in no-load condition (headlights, blower fan, rear defogger and A/C off) with M/T in Neutral or A/T in Neutral or Park. Connect scan tool to 16-pin Data Link Connector (DLC) before checking timing. Ensure idle speed and ignition timing are set to 8-12° BTDC (Red mark) @ 700-800 RPM. For timing mark identification, refer to illustration. See Fig 1.