Automatic System Torque Specifications
WARNING: This page is about a different car, the 2003 Acura 3.2CL, 2002 Acura 3.2CL, and 2001 Acura 3.2CL. However, it is still accessible from the selected car via links, so may be relevant.
AUTOMATIC SYSTEM TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) |
|---|---|
| Compressor-To-Bracket Bolts | 16 (22) |
| Compressor Bracket-To-Engine Block Bolts | 33 (45) |
| Compressor Clutch Center Bolt | 13 (18) |
| Suction Line-To-Evaporator Nut | 23 (31) |
| INCH Lbs. (N.m) | |
| Blower Unit Bolts & Nuts | 89 (10) |
| Compressor Relief Valve | 117 (13.2) |
| Condenser Bolts | 89 (10) |
| Condenser Line-To-Condenser Bolt | 89 (10) |
| Condenser Line-To-Receiver/Dryer Bolt | 89 (10) |
| Discharge Line-To-Compressor Nut | 89 (10) |
| Discharge Line-To-Condenser Bolt | 89 (10) |
| Evaporator Mounting Bolts & Nuts | 89 (10) |
| Fan Shroud Nuts | 89 (10) |
| Heater Unit Bolts | 89 (10) |
| Heater Unit Nut | 115 (13) |
| Radiator Bracket Bolts | 89 (10) |
| Receiver Line-To-Evaporator Nut | 115 (13) |
| Receiver Line-To-Receiver/Dryer Bolt | 89 (10) |
| Refrigerant Hose-To-Compressor Bolt | 89 (10) |
| Refrigerant Hose-To-Condenser Bolt | 89 (10) |
| Suction Line-To-Compressor Bolt | 89 (10) |