Intermittent Simulation
WARNING: This page is about a different car, the 2002 Acura MDX, 2002 Acura 3.5RL, 2002 Acura 3.2TL, and 2002 Acura 3.2CL. However, it is still accessible from the selected car via links, so may be relevant.
To reproduce conditions creating an intermittent fault, use following methods:
- Lightly vibrate component.
- Heat component.
- Wiggle or bend wiring harness.
- Spray component with water.
- Remove/apply vacuum source.
Monitor circuit/component voltage or resistance while simulating intermittent fault. If engine is running, monitor for self-diagnostic codes. Use test results to identify a faulty component or circuit.