LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 2003 >> 3.2CL Base >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 3.2L V6 Engine >> Removal & Installation >> VTEC Oil Pressure Switch
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

VTEC Oil Pressure Switch

  1. Disconnect the VTEC oil pressure switch connector, then remove the VTEC oil pressure switch (A). See Fig 1.
  2. Install the VTEC oil pressure switch using a new "O" ring (B).
Fig 1: Disconnecting VTEC Oil Pressure Switch Connector
G00299055Courtesy of AMERICAN HONDA MOTOR CO., INC.
scientia non olet · About LEMON Manuals