LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 2003 >> 3.2CL Base >> Repair and Diagnosis >> Electrical >> Starters >> On-Vehicle Testing >> Starter Solenoid Test
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Starter Solenoid Test

  1. Check the hold-in coil for continuity between the "S" terminal and the armature housing (ground). There should be continuity. If there is continuity, go to next step. If there is no continuity, replace the solenoid. See Fig 1 .
  2. Check the pull-in coil for continuity between the "S" terminal and "M" terminal. There should be continuity. If there is continuity, the solenoid is OK. If there is no continuity, replace the solenoid.
Fig 1: Identifying Solenoid Terminals
G99C50015Courtesy of AMERICAN HONDA MOTOR CO., INC.
scientia non olet · About LEMON Manuals