Transaxle Specifications
TRANSAXLE SPECIFICATIONS
| Application | In. (mm) | |||
|---|---|---|---|---|
| Clutch Clearance | ||||
| Reverse Clutch | .030-.037 (.75-.95) | |||
| 1st Clutch | .026-.033 (.65-.85) | |||
| 1st-Hold Clutch | .028-.035 (.70-.90) | |||
| 2nd & 3rd Clutches | .024-.031 (.60-.80) | |||
| 4th Clutch | .020-.028 (.50-.70) | |||
| Differential Ring Gear Backlash | .002-.006 (.05-.15) | |||
| Gear Clearances | ||||
| Countershaft 2nd Gear | .002-.005 (.05-.13) | |||
| Countershaft 4th Gear | 0-.003 (0-.08) | |||
| Mainshaft 4th Gear | 0-.003 (0-.08) | |||
| Oil Pump Side Clearances | ||||
| Oil Pump Drive Gear | .0083-.0104 (.210-.265) | |||
| Oil Pump Driven Gear | .0028-.0049 (.070-.125) | |||
| Oil Pump Thrust Clearance | ||||
| Standard | .001-.002 (.03-.05) | |||
| Wear Limit | .003 (.08) | |||
| Pinion Gear Backlash | .002-.006 (.05-.15) | |||
| INCH Lbs. (N.m) | ||||
| Secondary Gear Bearing Preload (1) | 31-40 (3.5-4.5) | |||
|
||||