October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Engine Mount Control System Check
- Warm engine to normal operating temperature. Ensure idle speed is about 800 RPM. Adjust idle speed as necessary. With engine at idle, depress brake pedal. Place transmission is gear.
- Have an assistant disconnect 6-pin engine mount control solenoid connector located near center of firewall. If sensed idle vibration changes noticeably, system is working properly. If sensed idle vibration does not change, check control solenoid circuit. See CONTROL SOLENOID CIRCUIT CHECK .