Starter Solenoid Test

Check starter solenoid for continuity between terminal "S" and armature housing (ground). See Fig 1 and Fig 2 . Check continuity between terminals "S" and "M". Continuity should exist. If continuity does not exist, replace solenoid.

Fig 1: Identifying Solenoid Terminals (2.3CL With M/T)

Courtesy of AMERICAN HONDA MOTOR CO., INC.

Fig 2: Identifying Solenoid Terminals (2.3CL With A/T & 3.0CL)

Courtesy of AMERICAN HONDA MOTOR CO., INC.