LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 1996 >> Integra LS, 4D Sedan, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System/Component Tests >> Idle Control System >> Brake Switch Signal
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Brake Switch Signal

  1. Ensure stoplights operate properly. While depressing brake pedal, measure voltage between specified PCM terminals. See BRAKE SIGNAL TESTING . See Figure.
    BRAKE SIGNAL TESTING

    Application Measure Between PCM Terminals
    Integra A9 & D5
  2. Depress brake pedal. If battery voltage exists, brake signal is okay. If battery voltage does not exist, repair open in Green/White wire between PCM connector and brake switch.
scientia non olet · About LEMON Manuals