LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 1996 >> Integra GS-R, 2D Coupe >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.8L 4-CYL - VTEC - GS-R >> Engine Lubrication >> Oil Pump >> Reassembly & Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Reassembly & Installation

  1. Reassemble oil pump, using Loctite on pump housing screws. Ensure oil pump turns freely. Install dowel pins and NEW "O" ring into cylinder block. Clean oil pump mating surfaces. Apply Liquid Sealant (08718-0001) to cylinder block mating surface of oil pump.
  2. Apply sealant to threads of inner bolt holes. Install oil pump before sealant dries. Install oil screen and oil pump. Wait at least 30 minutes before filling crankcase with oil. To complete installation, reverse removal procedure.
scientia non olet · About LEMON Manuals