LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 1995 >> NSX-T Standard >> Repair and Diagnosis (Single Page) >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Removal, Overhaul & Installation >> Ignition Systems >> Ignition Control Module >> Removal & Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal & Installation

  1. Disconnect the 8-P and 6-P connectors from the Ignition Control Module (ICM). See Fig 1 .
  2. Remove the two mounting bolts from the ignition control module.
  3. Slide the ignition control module out the front side.
  4. To install, reverse removal procedures.
Fig 1: Removing Ignition Control Module
G00087631Courtesy of AMERICAN HONDA MOTOR CO., INC.
scientia non olet · About LEMON Manuals