LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 1995 >> Integra GS-R, 4D Sedan >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Diagnosis - SP7A >> Component Testing >> BRAKELIGHT Switch
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

BRAKELIGHT Switch

  1. Disconnect electrical connector from brakelight switch, located on brake pedal support. See Figure . Note brakelight switch terminal identification. See Fig 1 .
  2. On models with cruise control, using ohmmeter, check for continuity between terminals "A" and "D" with brake pedal released. Continuity should exist.
  3. On all models, using ohmmeter, check continuity between terminals "B" and "C" with brake pedal depressed. Continuity should exist.
  4. If continuity is not as specified, ensure brake pedal is properly adjusted so brakelight switch has proper travel for switch operation. If proper brakelight switch travel exists, replace brakelight switch.
Fig 1: Identifying Brakelight Switch Terminals
G95E19343Courtesy of AMERICAN HONDA MOTOR CO., INC.
scientia non olet · About LEMON Manuals