October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Checking Ignition Timing
- Operate engine until cooling fan comes on. Locate Ignition Timing Adjusting connector (2-pin). Connector is located under right kick panel. Using Short Connector (07PAZ-010100
), connect terminals of ignition timing adjuster connector together. See Fig 1
.
- Red mark on crankshaft pulley should align with pointer. See Fig 2
. If Red mark and pointer are not aligned, adjust base ignition timing by turning distributor. See IGNITION TIMING
. Remove short connector from ignition timing adjusting connector.
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Courtesy of AMERICAN HONDA MOTOR CO., INC. IGNITION TIMING (Degrees BTDC @ RPM)
| Application |
M/T |
A/T |
| Integra |
14-18 @ 700-800 |
14-18 @ 700-800 |