LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 1995 >> Integra GS-R, 4D Sedan >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Controls - Basic Testing >> Ignition Checks >> Electronic Ignition System >> Ignition Coil Power Source
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Ignition Coil Power Source

  1. Remove distributor cap. Disconnect ignition coil primary leads. Turn ignition on. Measure voltage between ground and Black/Yellow wire of ignition coil wiring harness. See Figure, 7, or 8.
  2. Battery voltage should exist. If battery voltage does not exist, inspect for open in Black/Yellow wire between ignition coil and ignition switch. If wire is okay, go to IGNITOR INPUT TEST  procedure.
scientia non olet · About LEMON Manuals