LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 1993 >> NSX Automatic >> Repair and Diagnosis >> Engine Performance >> Engine Controls - Service & Adjustment Specifications >> Quick-Service >> Normal Service Conditions
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Normal Service Conditions

REPLACEMENT INTERVALS

Component Months Miles
Air Filter 24 30,000
Anti-Lock Brake System High Pressure Hose 48 60,000
Brake Fluid (Including Anti-Lock) 24 30,000
Coolant (1) 36 (1) 45,000
Engine Oil & Filter 6 7500
Fuel Filter & Hoses 48 60,000
Spark Plugs 48 60,000
Timing Belt 72 90,000
Transaxle Fluid 24 30,000
(1) First change is at 36 months/45,000 miles and every 24 months/30,000 miles thereafter.
INSPECTION INTERVALS

Component Months Miles
Brakes
Anti-Lock Brake System Operation 24 30,000
Brake Hoses & Lines (Including Anti-Lock Brake System) 12 15,000
Front Brake Calipers, Discs & Rotors 12 15,000
Front Brake Pads 6 7,500
Parking Brakes 12 15,000
Rear Brake Calipers, Discs, Pads & Rotors 12 15,000
Catalytic Converter Heat Shield 48 60,000
Cooling System Hoses & Connections 24 30,000
Exhaust System
Exhaust Pipe In Front Of Catalytic Converter 24 15,000
Exhaust Pipe & Muffler After Catalytic Converter 12 15,000
Front Wheel Alignment 12 15,000
Fuel Lines, Hoses & Connections 24 30,000
Generator Drive Belt 24 30,000
Idle Speed & Idle CO 48 60,000
PCV Valve 48 60,000
Power Steering System 12 15,000
SRS 10 Years After Production -
Steering Operation, Tie Rod Ends, Steering Gearbox & Boots 12 15,000
Suspension Mounting Bolts 12 15,000
Valve Clearance 12 15,000
Water Pump 72 90,000
BELT ADJUSTMENT - TENSION GAUGE METHOD (1)

Application New Belt Used Belt
Generator 176-198 lbs. (80-90 kg) 86-108 lbs. (40-50 kg)
Compressor (2) (2)
(1) Belt tension is measured at center of longest run.
(2) Information is not available from the manufacturer.
BELT ADJUSTMENT - DEFLECTION METHOD (1)

Application New Belt Used Belt
Generator 0.28-0.35" (7-9 mm) 0.47-0.55" (12-14 mm)
Compressor 0.22-0.30" (5.5-7.5 mm) 0.39-0.47" (10-12 mm)
(1) Belt deflection is measured at center of longest belt run at 22 lbs. (10 kg) pressure.