Transaxle Specifications
TRANSAXLE SPECIFICATIONS
| Application | Specification In. (mm) | ||||
|---|---|---|---|---|---|
| Clutch Clearance | |||||
| Reverse Clutch | .030-.037 (.75-.95) | ||||
| 1st Clutch | .026-.033 (.65-.85) | ||||
| 1st-Hold Clutch | .028-.035 (.70-.90) | ||||
| 2nd & 3rd Clutches | .024-.031 (.60-.80) | ||||
| 4th Clutch | .020-.028 (.50-.70) | ||||
| Differential Ring Gear Backlash | 0024-.0055 (.060-.140) | ||||
| Gear Clearances | |||||
| Countershaft 2nd Gear Clearance | .002-.005 (.05-.13) | ||||
| Countershaft 4th Gear Clearance | 0-.003 (0-.08) | ||||
| Mainshaft 4th Gear Clearance | 0-.003 (0-.08) | ||||
| Oil Pump Clearances | |||||
| Side Clearance | |||||
| Oil Pump Drive Gear | 0083-.0104 (.210-.265) | ||||
| Oil Pump Driven Gear | 0028-.0049 (.070-.125) | ||||
| Thrust Clearance | |||||
| Standard | .001-.002 (.03-.05) | ||||
| Wear Limit | .0028 (.070) | ||||
| Pinion Gear Backlash | .002-.012 (.05-.30) | ||||
| INCH Lb. (N.m) | |||||
| Secondary Gear Bearing Preload (1) | 31-40 (3.5-4.5) | ||||
|
|||||