September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Ignition Coil Test (Legend)
- Turn ignition off. Remove ignition coil. Using an ohmmeter, check resistance between primary terminals "A" and "B" of ignition coil. See Fig 1
.
- Resistance should be .9-1.1 ohms at 77°F (25°C). Replace coil if resistance is not within specification. Resistance value for secondary winding is not available.
IGNITION COIL RESISTANCE (LEGEND)
| Application |
Ohms @ 77°F (25°C) |
| Primary |
.9-1.1 |
| Secondary |
N/A |
Courtesy of AMERICAN HONDA MOTOR CO., INC.