Charge Warning Light
- Turn ignition on. Charge warning light should come on. If light comes on, proceed to ALTERNATOR OUTPUT TEST . If light does not come on, disconnect alternator connector, and short harness connector terminal "L" (White/Blue wire) to ground. See Figure or Figure .
- If light now comes on, proceed to ALTERNATOR OUTPUT TEST . If light does not come on, check for following conditions:
- Blown fuse No. 24 (Integra) or 22 (Legend).
- Open in White/Blue wire between warning light and voltage regulator.
- Open in Black/Yellow wire between warning light and dash fuse block or between dash fuse box and ignition switch.